DaySpring ISO Standards & Certification Consult

Excellence · Integrity · Certification

26 Palm Street, New Dawhenya, Accra, Ghana|P.O. Box AN 7062, Accra-North, Ghana Tel: +233 20 365 4169 | +233 55 000 6816|dsinspec@gmail.com|www.daySpringisogh.com

Management systems that pass audits and outlive them.

DaySpring ISO is an independent standards, audit and training practice for manufacturers, laboratories and service organisations. We prepare you for certification and stay with you through the three-year cycle.

On this page: Where to start Services Standards Sectors Questions

Where are you starting from?

Most enquiries begin with one of these six situations.

We need certification for the first time.
Start with a gap assessment. You receive a clause-referenced gap register, a remediation plan and a realistic date for the Stage 2 audit.
We hold ISO 9001:2015 or ISO 14001:2015.
Both editions were replaced in 2026. We run a transition gap analysis, update your documented information and audit the changes before your certification body does.
An auditor raised a nonconformity we cannot close.
We lead the root cause analysis, draft the corrective action and check that it works before you submit it.
Our laboratory needs accreditation.
We prepare testing, calibration and medical laboratories for assessment against ISO/IEC 17025:2017 and ISO 15189:2022.
We have no trained internal auditors.
We run your internal audit programme to ISO 19011:2026 and train your own people to take it over.
A tender asks for a certification commitment.
We provide a project plan, a consulting scope and a target audit date that you can submit with your bid.

Services across the certification cycle

Six stages, in the order most clients need them. Take the whole sequence or only the stage you are missing.

  1. Gap assessment and readiness review Diagnose

    A clause-by-clause review against one standard or several, with document review and a site walkthrough. You receive a gap register with clause references and a red, amber or green rating for each requirement, a sequenced remediation plan, a realistic certification timeline and an executive briefing.

  2. Management system implementation Build

    Manual, procedures, work instructions and forms written with your process owners. The work includes the risk and opportunity register, objectives and KPIs, document control and a records structure with retention periods.

  3. Internal audit programme Verify

    Independent audits to ISO 19011:2026, on site or using remote methods guided by ISO/IEC TS 17012:2024. Findings are classified, backed by evidence and followed to closure. Available as a retained annual programme.

  4. Supplier and second-party audits Verify

    Audits of critical suppliers and contract manufacturers against your own criteria or the relevant ISO clauses. Procurement receives a risk-rated report and, if you wish, corrective action follow-up.

  5. Certification readiness and audit support Certify

    A pre-certification audit that mirrors Stage 1 and Stage 2, attendance as your technical adviser during the certification body's visits, and nonconformity closure inside the certifier's deadline.

  6. Surveillance and integrated management Sustain

    Surveillance audit preparation, management review facilitation and a continual improvement programme through the three-year cycle, with quarterly check-ins and refresher sessions for your internal auditors.

Specialist support

Laboratory accreditation

For testing, calibration and medical laboratories working to ISO/IEC 17025:2017 or ISO 15189:2022. We build the quality manual, method validation files, measurement uncertainty budgets, the calibration and traceability register, and the internal quality control and proficiency testing plan. In ISO/IEC 17025:2017 the technical items fall under clauses 6.5 (metrological traceability), 7.2 (methods), 7.6 (measurement uncertainty) and 7.7 (validity of results).

Nonconformity and corrective action

Structured nonconformity reports, 5-Why and Ishikawa root cause analysis, corrective action plans and effectiveness checks, for findings raised by your certification body, your customers or your own auditors.

Integrated management systems

One set of documents, one risk register, one audit programme and one management review for quality, environment and occupational health and safety, built on the Harmonized Structure that ISO 9001, ISO 14001 and ISO 45001 share.

Standards register

The standards we work with most, with the edition now in force. Status checked on 13 November 2026.

StandardWhat it coversStatusEdition notes
ISO 9001:2026Quality management systemsNew editionPublished 16 September 2026. Replaces ISO 9001:2015.
ISO 14001:2026Environmental management systemsNew editionPublished 15 April 2026. Replaces ISO 14001:2015.
ISO 45001:2018Occupational health and safety management systemsUnder revisionStill the edition in force. A draft revision was issued in June 2026 and the new edition is expected in 2027.
ISO/IEC 17025:2017Competence of testing and calibration laboratoriesCurrentReviewed and confirmed by ISO in 2023.
ISO 15189:2022Quality and competence of medical laboratoriesCurrentFourth edition, in force.
ISO 22000:2018Food safety management systemsUnder revisionStill the edition in force. A new version is in development.
ISO 19011:2026Guidelines for auditing management systemsNew editionPublished 27 May 2026. Replaces ISO 19011:2018.

Also supported: ISO/IEC 27001 (information security), ISO 50001 (energy) and ISO 37001 (anti-bribery). Supporting documents we work with include ISO 9000:2026, ISO/TS 9002, ISO 14040 and ISO 14044, ISO 45003, ISO 45004 and ISO/IEC TS 17012:2024.

Sectors we work in

  • Manufacturing

    Packaging, plastics, metals and consumer goods. ISO 9001, supplier qualification and integrated programmes.

  • Oil, gas and energy

    Downstream services, pressure-system fabrication and mechanical integrity records, alongside DaySpring Engineering.

  • Testing and calibration laboratories

    ISO/IEC 17025 programmes covering method validation, uncertainty, traceability and proficiency testing.

  • Construction and engineering services

    Project quality systems, inspection and test plans, subcontractor control and project audits.

  • Food and beverage

    ISO 22000 with HACCP, supplier control and traceability, for processors entering export markets.

  • Pharmaceutical and healthcare

    Quality systems for wholesalers, healthcare providers, medical laboratories and device distributors.

  • Public sector and service delivery

    ISO 9001 for service quality in ministries, agencies and service organisations.

  • Information services and ICT

    ISO/IEC 27001 alongside ISO 9001 for software, outsourcing and data-handling organisations.

  • Logistics and trade services

    ISO 9001 for freight forwarders, customs brokers and trade-service firms.

Questions we hear most

How long does certification take?

A single-site organisation starting with little documentation usually reaches the Stage 2 audit in six to nine months. Larger or multi-site organisations often need nine to twelve. The time your own team can give is the main factor.

Is DaySpring a certification body?

No. DaySpring is an independent consultancy. We prepare you and support you through the audits. An accredited certification body issues the certificate.

We hold a 2015 certificate. What now?

ISO 9001:2015 certificates stop being valid after 30 September 2029, and ISO 14001:2015 certificates in April 2029. Agree a transition audit date with your certification body and close the gaps before it.

What does an engagement cost?

Fees depend on size, scope and the maturity of your documentation, so we do not publish standard rates. After a free scoping call you receive a written proposal with fees set out by phase and tied to deliverables.

Do we need a full-time quality manager?

Usually not, for a small or mid-sized organisation. You do need clear ownership of the system, time set aside for audits and reviews, and evidence of competence.

Do you work remotely or on site?

Both. Documentation, training and management review can be handled remotely. Gap analysis, internal audits and pre-certification audits need time on site. Most engagements combine the two.

What happens after certification?

A certificate runs for three years, with surveillance audits in years one and two and recertification in year three. Many clients keep us on a light retainer to maintain the system.

Can you support a tender?

Yes. We provide a project plan, consulting scope and target audit date for your tender response. Tell us the deadline early so the timeline is realistic.

Independent by design

DaySpring is a consultancy. It is not an accredited certification body and does not issue ISO certificates. ISO/IEC 17021-1:2015, clause 5.2.5, bars a certification body from offering management system consultancy. We stay on our side of that line, so the impartiality of your certificate is never in question.

Plan your route to certification

Send us your standards, sites and target audit date. A written proposal follows within five business days.